Plastic Laminate Toilet Partitions
  • Gives a more aesthetic appeal while maintaining economy.
  • Fabricated from 45 pound density, resin impregnated particle board. Plastic laminate is glued to particle board with a non-toxic, water resistant adhesive under high pressure. Components are edge banded prior to face lamination to ensure moisture run-off and vandal resistance. Not recommended for high moisture areas.
  • Doors, panels, and urinal screens - 1" thick (uses 7/8" particle board)
  • Pilasters - 1-1/4" thick (uses 1-1/8" particle board)
  • Hardware - Gravity cam-action hinges permit door to remain at desired position when not in use. Hinges, strike and keeper, coat hook, latch and brackets are chromed plated alloy. Door can be lifted to allow emergency access.
  • Installation instructions and all mounting hardware are supplied with each order.
Privacy/Urinal Screens
replacement doors, panels, pilasters and headrail below
toilet partitions
Wall Hung
1" thick by 42" high panel. Available in the following widths - 12, 18, 24 and 30". Specify - Color and Part # 9SWHS-XX (where XX is the screen width)
toilet partitions
Floor & Ceiling Braced Post and Panel
1-3/4" square post up to 120" maximum with 58" high panel. Specfy - Color and Part # 9SFCS-XX-Y (where XX is width from the front of post to the wall, Y= Floor-to-ceiling height). The overall width of the screen is 2" wider that the width of the panel
Overhead Braced / Floor Anchored
Pilaster is braced by headrail to wall. Panel is 58" high. Pilaster is 82" high. Specify - Color and Part # 9SOBS-XX (where XX is the width from the front of the pilaster to the wall).
The overall width of the screen is 2" wider that the width of the panel
Floor Anchored
70" high pilaster and 58" high panel. Specify - Color and Part # 9SFAS-XX (where XX is width from the front of the pilaster to the wall).
The overall width of the screen is 2" wider that the width of the panel
Replacement
Doors
Includes: Hinges and All Hardware

Available for the following door opening widths (actual door size is 3/8" narrower that the opening) - 22, 24, 26, 28, 30, 32, 34, 36"

Specify -
Color
Part # 9TDL-XX (where XX is door opening width)
Pilaster type - Standard round edge, square edge or mounted on flat wall

Panels
Includes:
2 Brackets

Available for the following widths - 12, 14, 16, 18, 20, 22, 24 26, 28, 30, 32, 34, 36, 38, 40, 42, 44, 46, 48, 50, 52, 55, 58, 60, 60, 64, 66, 68, 70, 72, 74, 76, 78". Acual widthis 1/2" less.

Specify -
Color
Part # 9TPL-XX (where XX is door opening width)
Reinforcing for grab bars available

Pilasters
Includes: Brackets and Stainless Steel Shoes

Available for the following widths - 2, 3, 4, 5, 6, 7, 8, 10, 12, 18, 22 and 24".

Specify -
Color
Part # 9TLL-XX (where XX is pilaster width)

Overhead braced for 82" length, floor braced for 70"length, wall hung for 58" high, ceiling hung for 84" length, and floor-to-ceiling for up to 120" maximum length.

Aluminum Headrail
Available in the follwoing lengths - 62, 75, 98 and 120". And for 1" and 1-1/4" thick pilasters.

Specify -
Part # 9THL-XX-Y (Where XX is length and Y is the pilaster thickness). 1-1/4" Wide Pilaster, Anti-grip type. Has 1/4" slot for curtain.