Manufacturers
We are leading bathroom stall door hardware distributors. We sell bathroom stall door hardware that was manufactured by top name brands in the bathroom stall hardware commercial market today.
If you are working on renovating a commercial bathroom in a public building, you’ll want to be sure you’re using toilet stall door hardware that was produced by highly regarded stall manufacturers. This will ensure that the bathroom partition hardware that you use is tough and damage resistant for the long haul.
At Robert Brooke & Associates, we want your shopping experience to be a cinch. That’s why we have a website where you can order bathroom stall parts online from the cozy setting of your home or office.
Our warehouse and office location is Troy, Michigan, but we ship toilet partition hardware across the United States and to Canadian locations. Check the Lead Time to see if your item is in stock at our warehouse to get a rough estimate of when it will ship and then place your order. We will get started on putting together your shipment ASAP whether we currently have the items that you need at our warehouse or they are only currently available at the manufacturer’s factory.
Toilet Stall Hardware Manufacturers
Below you will find a list of the manufacturers we work with. You can gather some important info about these brands by visiting their webpage. If you already know the name of the brand that makes the bathroom stall door hardware that you need for your renovations or repairs, then you’re already halfway there.
- Accurate bathroom stall parts
- All American toilet stall door hardware
- American Sanitary stall parts
- Ampco toilet stall door hardware
- Bobrick toilet stall door hardware
- Fiat toilet stall hardware
- Flush Metal bathroom stall parts
- General bathroom stall parts
- Generic (non-brand) bathroom stall door hardware
- Global bathroom stall door hardware
- Hadrian bathroom stall door hardware
- Hiny Hiders partition parts
- Knickerbocker partition parts
- Metpar bathroom stall door hardware
- Mills partition parts
- Sanymetal bathroom stall hardware
Bathroom Stall Door Hardware Sold Online
Have you seen our extensive online selection of toilet stall hardware? You will undoubtedly have plenty of options when choosing the most suitable restroom stall door hardware for your restroom project.
Our restroom stall door hardware consists of assorted parts that will come in handy when refurbishing a public restroom or replacing a worn-out stall part in a commercial restroom. Our supply includes hinges, latches, keeper bumpers, pintles, hinge pins, hinge cams, hinge repair kits, coat hooks, pilaster shoes, door pulls, door stops and more restroom stall door hardware made by prominent manufacturers in the restroom stall industry.
Restroom Stall Door Hardware Distributors
Our company has been supplying dependable bathroom stall door hardware for more than 40 years. We have built a team made up of highly qualified and experienced professionals who have expertise in the bathroom stall hardware commercial industry.
Our team has worked with many businesses and organizations such as athletic facilities, educational institutions, convention centers and warehouses to name a few. We love providing bathroom partition hardware that our customers can feel confident when using to make necessary repairs to the commercial restrooms they are fixing up.
Our experts are hard at work supplying our customers with the best stall hardware made by respected bathroom stall part manufacturers, but we will always take the time out to assist you when you have an order question. You are welcome to contact us at Sales@RobertBrooke.com or at 1 (800) 642-2403 about your order of toilet partition hardware from our site if you require any type of assistance.
-
Accurate Turn Latch & Cover
Accurate Turn Latch & Cover also known as 50-2511390, 50-2511380, 50-8511589, 50-8511500 complete. Chrome Plated. This latch assembly was used prior to January 2013. There is no exact replacement available.
This old style lock is discontinued 1/1/2022.
See link for replacement kits
https://www.robertbrooke.com/bathroom/partition-parts/conc-latch-fix-it-kit.html9HACL36N -
Accurate Top or Bottom Hinge
Partitions Toilet Top or Bottom Hinge for plastic laminate doors used for top or bottom for 1 1/4" square edge post. The hinge mounts to the post to support the door. Chrome plated Zamac die cast construction. The hinge measures 2-1/4" high by 1-1/4" deep with a slot depth of 1-5/16" and 1-1/2" between screws on center. Hinge lug projects out 1-11/16" and is 1/2" thick with a 5/8" diameter hole. Also known as a Bathroom Stall Pivot Hinge Top/Bottom 1-1/4". Manufacture part # 3540. Same as 9G631A on our website.
9HAP10 -
Accurate U Trim Door Insert
Accurate Partitions Laminate "U" Trim Door Insert for Top or Bottom 1" Door
Chrome plated Zamac die casting construction. Large hole is 3/4" diameter, small hole is 3/8" diameter. Hole in the U is 9/32" and counter sunk. Insert measures 1" wide by 2-9/32" deep by 2-3/16" high. Also known as a Bathroom Stall Door Insert Top/Bottom 1". Used on Accurate and Global Toilet Partitions.
also known as 9G631B, manufacture part # 1680
9HAP15 -
Fiat Bottom Hinge
FIAT BOTTOM HINGE FOR 1-1/4" SQUARE EDGE PILASTER POST CHROME PLATED Chrome plated Zamac die cast construction. The hinge measures 2-1/4" high by 1-1/4" wide and the hole spacing is 1-1/2". The U channel is 2-1/4" by 1-1/4" by 1" deep. The lug projects out 1-5/8" by 1/2" thick with a 5/16" diameter bushing. Also known as a Fiat Bathroom Stall Pivot Hinge Bottom 1-1/4". Manufacture part # 3290.
Shipped with mounting screws.
a=1-5/8"
also known as General, American Sanitary, Flush Metal, Fiat Tiolet Partition 91000P, 9AM280, 9FL700
9F0301 -
Global Ada Latch Knob & Cover
Global Partitions Concealed Ada Latch Knob Cover Chrome Plated
Zamac die cast construction with polished chrome plating. Outside diameter of the knob and cover are 1-5/8" with the inner ring diameter of 1-1/4". The ADA Barrier Free Lever is 2-9/16" long when measured from the all the way across the cover. The cover has an overall depth of 1-1/4". Also known as a Bathroom Stall Concealed ADA Latch Cover and Knob Assembly. Manufacture part # 6150, 1380
9G0139A -
-
-
Fiat Keeper Bumper Out Swing for 1-1/4"
Fiat Partitions Keeper Bumper For 1-1/4" Outswing Square Edge Pilaster Or Post
Zamac die casting that is polished chrome plated. The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for outswinging doors. Also known as a Bathroom Stall Strike and Keeper-Outswing 1-1/4". Manufacture part # 5210
Shipped with mounting screws.
9F0303 -
Fiat Keeper Bumper Concealed
Fiat Partitions Keeper Bumper Concealed And Strike For Concealed Latches Inswing/Outswing 1-1/4"
Zamac die cast and polished chrome plate construction. Keeper is 1-1/4" tall by 2-3/8" wide by 1-3/4" deep. The strike is a1/2" thick and the slot is 7/16" deep. The opening to mount it on the square edge pilaster or post is 1-1/4" by 1-1/4" Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5960
Shipped with screws for mounting.
Same as the 9S8861
9F0227 -
Accurate Slide Bolt Latch
Accurate Partitions Surface Mounted Slide Bolt Latch
Zamac die cast construction, polished chrome finish. Latch base is 4-1/2" high with 3-1/2" hole spacing. Latch bolt is 3-3/32" long by 1" wide by 3/16" thick. The latch bolt clearance is 9/16" from the back of the base to the under side of the latch bolt and projects out 15/16". The latch projects out 1-9/16" from the face of the door when installed. Also known as a Bathroom Stall Surface Mounted Slide Bolt Latch and Toilet Partition Locks. Manufacture part # 5050.
Shipped with mounting screws.
Used by accurate and global
also known as 9G0136
9HAP20 -
Fiat Pintle
Fiat Partitions Pintle 5/8" Diameter For Steel Doors
Steel and white nylon construction. The Pintle is 5/8" diameter by 2-1/4" overall length with 5/16-18 threaded end. Also known as a Bathroom Stall Bottom Pintle 5/8" Medium Lift. Manufacture part # 98175.
Shipped with nut and lock washer.
9F0311 -
Fiat Bottom Door Insert
Fiat Partitions Bottom Door Insert For 1" Doors
Chrome plated Zamac die cast construction. The bottom door insert measures 2-1/8" by 1" by 13/16". The insert has one hole, which is 7/32" diameter. The square hole is 29/32" wide by 1". Also known as a Fiat Bathroom Stall Door Insert Bottom 1". Manufacture part # 4700.
9F0317 -
Fiat Nylon Cam
Fiat Partitions Nylon Cam
White nylon plastic construction. The square head measures 7/8" by 1-1/8" with a 11/16" diameter hole. The cylindrical part is 7/8" diamter. The overall height is 1-3/16", with square part measuring 21/32". Also known as a Fiat Bathroom Stall Cam. Manufacture part # 98195. For use with an 11/16" diameter pintle.
9F0312 -
Accurate Slide Bolt Latch Stainless Steel
Accurate Slide Bolt Latch Stainless Steel
Cast stainless steel construction. Base is 4-1/2" tall with a hole spacing of 3-1/2" on center. Latch bolt is 3-3/32" long by 1" wide by 3/16" thick and has a throw of 15/16". The latch projects out 1-9/16". The distance from the back of the base to the underside of the latch bolt is 9/16". Also known as a Bathroom Stall Slide Latch and Toilet Partition Locks. Manufacture part #5053.
Shipped with screws.
Used by accurate and global.
9G0136SS -
Global Bottom Hinge
Global Partitions Bottom Hinge For 1-1/4" Round Edge Post
Chrome plated Zamac die cast construction. Pivot hinge is 2-3/16" tall by 1-1/4" wide. The slot that wraps around the post is 1-1/4" wide and 11-16" deep. The hole spacing is 1-1/2" on center. The lug projects out 1-1/2" and is 1/2" thick. The bushing on the lug is 5/16" diameter. Also known as a Bathroom Stall Pivot Hinge Bottom 1-1/4". Manufacture part # 3010.
Shipped with mounting screws.
A=1-7/6"
9G0230 -
Global Keeper Bumper Concealed
General Toilet Partition Keeper Bumper For Square Edge 1-1/4" Thick Posts
Zamac die cast construction and polished chrome plated. The keeper and strike is 2-1/2" tall by 1-7/8" wide. The stop is 17/32" thick and projects out 3/4". The mounting holes are 1-1/2" on center. The locking slot is 7/16" deep. Generally used with concealed latches. Also known as a Bathroom Stall Strike and Keeper - Inswing/Outswing 1-1/4". Manufacture part # 5230.
Shipped with mounting screws.
9G631H -
Sanymetal Keeper Bumper Concealed
Sanymetal Toilet Partition Keeper Bumper For Concealed Latches 1-1/4" Round Edge Post
Polished chrome plate Zamac die casting construction. Strike and Keeper measures 1-1/4" high by 2-3/8" wide by 1-3/4" deep. Stop is 1/2" thick and projects out 1-1/8". The latching slot is 7/16" deep x 3/4" high. This Bathroom Toilet Door Keeper is designed for use on 1-1/4" thick round edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5510.
Shipped with mounting screws.
9S8801 -
Global Top Bottom Hinge
Global Partitions Top or Bottom Hinge for plastic laminate doors used for top or bottom for 1 1/4" square edge post. The partition hinge mounts to the post to support the door. Chrome plated Zamac die cast construction. The hinge measures 2-1/4" high by 1-1/4" deep with a slot depth of 1-5/16" and 1-1/2" between screws on center. Hinge lug projects out 1-11/16" and is 1/2" thick with a 5/8" diameter hole. Also known as a Bathroom Stall Pivot Hinge Top/Bottom 1-1/4". Used by Global and Accurate Partitions toilet. Manufacture part # 3540. Same as 9hap10 on our website.
9G631A -
Global U Trim Door Insert
Global Partitions Laminate "U" Trim Door Insert For Top Or Bottom 1" Door
Chrome plated Zamac die casting construction.Large hole is 3/4" diameter, small hole is 3/8" diameter. Hole in the U is 9/32" and counter sunk.Insert measures 1" wide by 2-9/32" deep by 2-3/16" high. Also known as a Bathroom Stall Door Insert Top/Bottom 1". Used on Accurate and Global Toilet Partitions.
also known as 9HAP15, manufacture part # 16809G631B -
Global Slide Bolt Latch
Global Partitions Surface Mounted Slide Bolt Latch Chrome Plated
Zamac die cast construction, polished chrome finish. Latch base is 4-1/2" high with 3-1/2" hole spacing. Latch bolt is 3-3/32" long by 1" wide by 3/16" thick. The latch bolt clearance is 9/16" from the back of the base to the under side of the latch bolt and projects out 15/16". The latch projects out 1-9/16" from the face of the door when installed. Also known as a Bathroom Stall Surface Mounted Slide Bolt Latch. Manufacture part # 5050.
Shipped with mounting screws.
Used by accurate and global
9G0136 -
American Sanitary Slide Bolt Latch
American Sanitary Slide Bolt Latch Chrome Plated.
Zamac die cast construction, polished chrome finish. Latch base is 4" high with 2-3/4" hole spacing. Latch bolt is 3-3/16" long by 3/4" wide by 3/16" thick. The latch bolt clearance is 9/16" from the back of the base to the under side of the latch bolt and projects out 15/16". The latch projects out 1-9/16" from the face of the door when installed. Also known as a Bathroom Stall Surface Mounted Slide Bolt Latch. Manufacture part # 5020.
Shipped with mounting screws.
9AM500 -
Hadrian Slide Bolt Latch
Hadrian Partitions Slide Bolt Latch Chrome Plated
Zamac die cast construction, polished chrome finish. Latch base is 4" high with 2-3/4" hole spacing. Latch bolt is 3-3/16" long by 3/4" wide by 3/16" thick. The latch bolt clearance is 9/16" from the back of the base to the under side of the latch bolt and projects out 15/16". The latch projects out 1-9/16" from the face of the door when installed. Also known as a Bathroom Stall Surface Mounted Slide Bolt Latch. Manufacture part # 5020.
Shipped with mounting screws.
9HH125
