Dor-O-Matic Panic Devices
Get your Dor-O-Matic (Falcon) exit devices delivered straight to your door! We have a range of Dor-O-Matic (Falcon) panic devices that can be purchased right on our website for delivery.
We have both rim and concealed vertical rod Dor-O-Matic (Falcon) exit devices available. If you need to replace your currently installed Dor-O-Matic (Falcon) exit device with a new one or new parts, we have exactly what you need.
At Robert Brooke & Associates, we stock Dor-O-Matic (Falcon) exit devices and parts for your commercial door. Our supply of Dor-O-Matic (Falcon) exit devices is one of the most extensive in the nation.
Order your high-quality Dor-O-Matic panic device online today! You can count on its durability to help provide safe egress in your school, hospital, or other building during emergency situations.
About the Dor-O-Matic (Falcon) Exit Devices Company
Dor-O-Matic first began producing products in the 1950s. It wasn’t until the late ‘60s that they started introducing their Dor-O-Matic exit device lines.
The company was eventually purchased by Ingersoll Rand and is now a part of Allegion along with other popular panic device manufacturers. The Dor-O-Matic and Monarch brand names have been changed to Falcon.
Check Out Our Supply of Dor-O-Matic (Falcon) Exit Devices
Whether you need to replace or repair an existing Dor-O-Matic (Falcon) exit device or install a new one to the commercial door in your facility, our experienced team is here to help you select your product. We can also provide clear instructions to help guide you through the installation and repair process for our Dor-O-Matic (Falcon) exit devices and hardware. Contact us today for more information about our selection of Dor-O-Matic (Falcon) exit devices.
We offer a wide variety of Dor-O-Matic exit devices to meet your needs. These products have plenty of unique features to meet your specific requirements. Plus, they are shipped to customers with the appropriate screws and strikes for set-up. Overall, the products in this Dor-O-Matic line are designed to provide easy, reliable, and secure exits in your facility.
Check out the Dor-O-Matic (Falcon) exit devices and some of their features below. You can also find longer and more detailed descriptions on the product page of each Dor-O-Matic (Falcon) exit device that we carry.
The 1390 Dor-O-Matic (Falcon) exit devices are no longer being manufactured. Contact us for details about the replacement latches that we carry that will fit the 1390. Its replacements are the 2390 Dor-O-Matic (Falcon) exit device and the EL2390 Electric Retraction device.
The 1990 Dor-O-Matic exit device is known for its reliability and it is one of the most commonly used devices in commercial facilities to this day. Most of the 1990 replacement parts will work with the 990 devices that are still installed in many buildings but are no longer being manufactured.
The 2090 Dor-O-Matic (Falcon) exit device is another commonly used device. Most of the 2090 replacement parts will work with the 1090 devices that are still installed in many buildings but are no longer being manufactured. The 2090 can also serve as a precise replacement for the 1090.
The 1490 Dor-O-Matic (Falcon) exit devices along with the EL1490 Electric Retraction devices are two of the most heavy-duty in this line. Their tough construction consists of rugged steel and aluminum. The 1590 Dor-O-Matic (Falcon) exit device is also heavy-duty and constructed of rugged steel and aluminum.
The 1690 Dor-O-Matic (Falcon) exit device and the EL1690 Electric Retraction Dor-O-Matic (Falcon) exit device are perfect for high-traffic facilities and can also retrofit the 1990 crossbar device. The 1790 Dor-O-Matic (Falcon) exit device and the EL1790 Electric Retraction device require less maintenance and fewer adjustments to install. These heavy-duty devices can also retrofit the 2090.
Plus, don’t forget that we also offer Dor-O-Matic replacement parts for your device. This hardware can be used to upgrade currently installed Dor-O-Matic panic devices that are in need of some reconditioning after they have been in use for several years.
Dor-O-Matic Exit Device Inquiries
For more details about our selection of Falcon panic devices, contact our office and one of our staff members will assist you. Whether you reach us by phone or email, we are always more than happy to help you find the perfect Dor-O-Matic (Falcon) exit device to suit your needs. You can reach our office by dialing 1-800-642-2403 or emailing sales@robertbrooke.com so that we can help in ensuring satisfaction when the device that you ordered arrives.
-
Doromatic 1490 Exit Device
The Doromatic 1490 is our heaviest device and offers a clean appearance with pushpad styling and a variety of practical features. The Doromatic 1490 is built with rugged steel operating mechanisms, and durable aluminum push bars and end caps.
Replacement parts are also available
Shipped with all screws and strikes.
1490EO- -
Doromatic 1590 Exit Device
The Doromatic 1590 is our heaviest device and offers a clean appearance with pushpad styling and a variety of practical features. The Doromatic 1590 is built with rugged steel operating mechanisms, and durable aluminum push bars and end caps.
Replacement parts are also available
Shipped with all screws and strikes.
1590EO- -
Doromatic EL1490 Exit Device
Doromatic EL1490 Exit Device with Electric Latch Retraction
The Doromatic 1490 is our heaviest device and offers a clean appearance with pushpad styling and a variety of practical features. The Doromatic 1490 is built with rugged steel operating mechanisms, and durable aluminum push bars and end caps.
Replacement parts are also available
Shipped with all screws and strikes.
EL1490EO -
Doromatic EL1590 Rim Exit Device
Doromatic EL1590 Rim Exit Device with Electric Latch Retraction
The Doromatic 1590 is our heaviest device and offers a clean appearance with pushpad styling and a variety of practical features. The Doromatic 1590 is built with rugged steel operating mechanisms, and durable aluminum push bars and end caps.
Requires Power Supply
Replacement parts are also available
Shipped with all screws and strikes.
EL1590EO- -
Doromatic Surface Strike STK45
Doromatic Surface Strike STK45
This strike is used when we have a double door application without a center post. By using this strike we can have one door with a surface vertical rod and one door a rim device, which will save money because vertical rods are usually expensive. This strike can be used with the 1590, 1790 and 2090 Rim Devices. The strike base measures 1-5/16" wide by 3-1/4" high, and 1/4" thick. The three slots are 1-1/4" on center. This strike ships with the mounting screws.
US19-Black finish
STK45 -
Doromatic Exit Device 1690/1990 Top Strike PB48
Dor-o-Matic top strike.
Used on the Dor-o-Matic 1490, 1690, 1990 and 2390 Concealed Vertical Rod Exit and Panic Devices. The plate measures 1" x 1-1/16" with 4 holes. The mounting holes are 11/16" x 11/16" on center. The diameter of the pin is 7/16" and projects out 5/32". Ships with mounting screws and 3 shim plates.
Doromatic part # PB48
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1690 Repair Parts BreakdownG199034 -
Doromatic 1690 Exit Device
The design of the Doromatic 1690 is ideal for demanding, high-traffic applications. The vertical rods and latch mechanisms are concealed in the vertical door stile, ensuring trouble-free operation. Cast metal cover plates and end caps hold up to rigorous use. A quick, singlepoint dogging feature in the housing deactivates the device, permitting unrestricted traffic flow. The Doromatic 1690 may also be used to retrofit a Doromatic 1990 Series crossbar device.
Replacement parts are also available
Shipped with all screws and strikes. The 1690NL Cylinder Assembly (169CA) is required if you wish to use a key cylinder on the exterior, SEE RELATED PRODUCTS toward the bottom of this page.
1690EO -
Doromatic MEL1690 Exit Device
The same as the Falcon / Dor-o-Matic 1690 with Mechanical Electric Latch Retraction. Some of the features are listed below. A power supply is required.
Hand: Field reversible, non-handed.
Centercase and end cap are powder-coated black only.
Strikes: PB48 top.
Latches: Hex bottom latch (standard), RL - rod bottom latch, PL - Pullman bottom latch
Cylinder: Rim, key entry (NL) or hold back (HB) feature available.
Field selectable.
Sizes: 30", 36", 42", and 48".
Doors: 1-3/4" thick metal doors, specify if other.
Projections: 3-3/8" in neutral position, 23/8" in dogged position.
Pushbar height is 2-1/2.
Stile: 1-3/4" minimum.Voltage: Current:
24 VDC
1 ampReplacement parts are also available
Shipped with all screws and strikes.
MEL1690EO- -
Falcon Mechanical Electric Latch (MEL) Retrofit Kit 47867200
New for 2024 the Falcon MEL 47867200 Mechanical Latch Retraction. Retrofits all 1690, 1790, 24 and 25 Series devices to Mechanical Latch Retraction. This new system uses the PS902 Power Supply. The benefits for the MEL Series over the Older EL series are lower power draw (1 amp verse 16 amp), and more flexible power supply location, longer wire runs and thinner guage wires.
G47867200 -
Doromatic 1790 Exit Device
The Doromatic 1790 rim device is typically used in applications where maintenance is a concern because the rim device has fewer parts and pieces than current exit devices. The result is less maintenance and adjustment. The streamlined design has no openings for chains, reducing the risk for code infringements and offering increased building security by eliminating the possibility of tampering and forced entry through the use of coat hangers and other tools. The Doromatic 1790 may also be used to retrofit a Doromatic 2090 series crossbar device.
Replacement parts are also available
Shipped with all screws and strikes. If you wish to use a key cylinder on the exterior, you will need the 1790 NL/HB Cylinder Assembly, 179CA.
1790EO -
Doromatic MEL1790 Rim Exit Device
The same as the Falcon / Dor-o-Matic 1790 with Electric Latch Retraction. Some of the features are listed below. A power supply is required.
Hand: Field reversible, non-handed.
Center case and end cap are powder-coated black only.
Cylinder: Rim, key entry (NL) or hold back (HB) feature available.
Field select-able.
Sizes: 30", 36", 42", and 48".
Doors: 1-3/4" thick metal doors, specify if other.
Projections: 3-3/8" in neutral position, 23/8" in dogged position.
Push bar height is 2-1/2.
Stile: 1-3/4" minimum.1 amp 24 volt
Replacement parts are also available
Shipped with all screws and strikes.
MEL1790EO- -
Doromatic 2090 Exit Device
The Doromatic 2090 provides balanced appearance, dependable performance and economical pricing, making it a popular choice where rim exit devices are required.
Hand: Specify RHR or LHR, not reversible. See "More View"
Left Hand Reverse shown in picture
Latchbolt: 1/2" throw hardened steel.
Dogging Feature: Hex dogging standard.
Sizes: Field adjustable width, 41" crossbar standard, fits
3' 8" door width, extra length crossbars available.
Doors: 1-3/4" thick metal or wood doors, specify if wood door.
Projections: 4-3/8" extended, 2-1/2" depressed.
Stile: 1-3/4" minimum.Replacement parts are also available
Shipped with all screws and strikes.
G2090EO -
Doromatic 1990 Exit Device
The classic look of Doromatic 1990 has a long history of reliable performance. It is equipped with hardened steel latches and adjustable strike to ensure safety, security and quiet operation.
Hand: Field reversible, non handed.
Dogging Feature: Hex dogging standard.Sizes: Field adjustable width, 41" crossbar standard fits 3' 8" x 7'
door, extra length cross bar available.Replacement parts are also available
Shipped with all screws and strikes.
G1990EO -
Doromatic 1990 and 990 Housing, and 1090 2090 Inactive Housing
Dor-o-matic Complete housing assembly for the 990/1990 and the inactive sides of the 1090/2090. Includes all components to replace your current housing. Housing measures 7-1/2" long by 1-3/16" wide, with a 6-1/4" center to center stud mounting.
See diagrams for handing.
Doromatic part #
4270902784 - right hand dark brown
4270902782 - right hand aluminum
4270902785 -right hand black
4270902778- left hand dark brown
4270902782 - left hand aluminum
4270902779- left hand blackG199001 -
Doromatic Exit Device 1990/2090 Cross Bar
Dor-o-Matic 990/1090/1990/2090 Cross Bar
41" or 48" cross bar is sent, cut to size. 48 inch bars are not in stock, leadtime is 3 weeks
Doromatic part # CBAR or 47285197 for 41" bars and 47286482 for the 48" bars.
The Dark Bronze Cross Bars are a very dark bronze and will be closer to black.
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts BreakdownG199039 -
Doromatic Exit Device 2090 Active Case
Doromatic Complete 2090 and 1090 Active Case. Includes all of the interior hardware. Just unscrew or loosen the three set screws and remove your old case and install and tighten the three set screws. Housing measures 7-1/2" long by 1-3/16" wide.
4270902740 Left Hand Aluminum Stock
4270902742 Left Hand Dark Brown Stock
4270902743 Left Hand Black * One week lead time
4270902746 Right Hand Aluminum Stock
4270902748 Right Hand Dark Brown Stock
4270902749 Right Hand Black * One week lead timeG209001 -
Doromatic 2390 Exit Device
Doromatic 2390 Exit Device
The 2390 is a Grade 1 exit device designed for high use and abuse, and delivers a variety of performance features that ensure smooth, easy and reliable operation. Easier rod adjustment simplifies installation. This device is for replacment of older worn out Falcon / Dor-o-Matic 2390's. This is not a good exit device to use to replace devices from different manufactures.To order specify:Door Width:42" (Device size has a 21" Touchbar)
48" (Device size has a 24" Touchbar)Color:
Aluminum
Dark Bronze
Device Centerline to Finished Floor Measurement in inches:2390EO- -
Doromatic EL2390 Electric Retraction Exit Device
Doromatic EL2390 Electric Retraction Exit Device is for replacement of existing Non Electrified devices. Offering the same rugged performance of the standard 2390, but with an internal solenoid to retract the concealed vertical rods. This device is ideal as a replacement for 2390's when controlled access is wanted. Requires a Power Supply.
The 2390 is a Grade 1 exit device designed for high use and abuse, and delivers a variety of performance features that ensure smooth, easy and reliable operation. Easier rod adjustment simplifies installation. This device is for replacment of older worn out Falcon / Dor-o-Matic 2390's. This is not a good exit device to use to replace devices from different manufactures.To order specify:Door Width:42" (Device size has a 21" Touchbar)
48" (Device size has a 24" Touchbar)Color:
Aluminum
Dark Bronze
Device Centerline to Finished Floor Measurement in inches:EL2390EO- -
Dor-O-Matic 2390 231CA Cylinder Kit
The Dor-O-Matic 2390 231CA Cylinder Kit converts your 2390 exit only to a Night Latch or Hold Back function key lock. All the hardware is included in the package to convert your device, except for the Mortise Cylinder. Housing measures 4-1/2" tall by 1-11/16" wide with a 1-1/8" projection. We send the 231CA which includes the Schlage B502-191 Cam. The 239CA is the same kit, but without the Schlage Cam.
231CA- -
Doromatic Exit Device 1690/1790/2390 Dogging Assembly Kit.1197
Doromatic 1690 1790 replacement dogging assy. The dogging assembly is used to dog the door in the open position, so people can enter the building without having to unlatch the door. The kit ships with form threading screws for installation.
Doromatic part # KIT.1197
Dor-o-Matic 1690 Repair Parts Breakdown
Dor-o-Matic 1790 Repair Parts Breakdown
Falcon / Dor-o-Matic 2390 Parts Break Down<GPBX16 -
Doromatic Exit Device 1990 Repair Kit PBX-2
Dor-o-Matic 1990 repair kit. The kit includes the following:
4 Mounting Studs
1 Hex Key 7/32"
1 Allen Key 1/8"
1 Pinion
1 Cylinder Bushing
2 Rod Bushings
1 Retractor
1 Traveller AssyDoromatic part # 4270902091 or PBX-2
GPBX2 -
Doromatic Exit Device 1690/1790/2390 Dogging Hex Shaft
Doromatic 1690/1790/2390 replacement dogging hex shaft. Replaces the allen wrench fitting for the Doromatic exit devices
GPBX16-SHF -
Monarch Dor-O-Matic 600339 NL Spring Package
The Monarch / Dor-O-Matic / Falcon 600339 NL Spring Package converts the 179L , 712L, 712K, 912l and 911K to an NL function. The NL function is one were the Lever Handle can not be unlocked and left in the unlocked position when the key is removed. Spring has a 5/8" diameter. See attached instructions.
G600339 -
Dor-o-Matic Falcon EL1690-EL1790-EL2390 Solenoid
The Dor-o-Matic Falcon 4758959 Soleniod is used on the EL1690, EL1790, and EL2390 Electric Latch Retraction exit devices. The Solenoid measures 4-1/8 inches long including mouting flange, and has an 1-3/4 inch diameter. The mounting screw spacing is 1 inch on centers. The Plunger is included and has a 7/8 inch diameter and is 2-15/16 inches long. We find the number 971687 on the solenoid.
G47639878
