Stops / Holders| Burns Manufacturing

Automatic Floor Type Holder and Stop

Cast brass construction, and then chrome plated. Measures 3-11/16" high by 3" wide with a 1-15/16" projection. The strike is 1-3/16" high. Spring loaded brass roller, rolls over the the strike to lock the door in the open position. To release, just give the door a tug.

Material:	Forged Brass with Gray Rubber Bumper
Size:	1-11/16" × 4" x 5/16" Base x 1" High
Finishes:	US26D-Brushed Chrome Finish Only
Notes:	Traditional slipper low dome design
Standard Fasteners:	Supplied with wood screws and machine screws with anchors

Material:	Cast Brass with Gray Rubber Bumper
Size:	2" × 4" x 1/2" Base x 1-1/4" High
Finishes:	US26D-brushed chrome finish only
Notes:	Traditional slipper high dome design
Standard Fasteners:	Supplied with wood screws and machine screws with anchors

Dome Door Stop 1-5/8" Height 521

Forged brass construction with a gray rubber bumper. 1-3/4" diameter x 1-5/8" High x 1/4" Base thickness, US26D-Brushed Chrome finish only.
Supplied with wood screws and machine screws with anchors

Material:	Cast Brass or Bronze with Black Bumper
Size:	2-1/2" diameter Base x 3-7/8" High
Finishes:	US4 brushed brass US10B dark bronze US26 polished chrome US26D brushed chrome US3 polished brass
ANSI:	L01371
Standard Fasteners:	(1) lead anchor (2) #10 × 1" SMS (1) #10 × 1" SMS with plastic anchor (1) 5/16-18 × 2-1/2" stud (1) 5/16-18 × 2-1/2" hanger bolt

Floor Mounted Door Holder Heavy Duty 541

3" Diameter
3" Height
Includes the 4-1/2" lag bolt & lag shield.

Material:	Brass
Size:	1-1/4" diameter x 1-1/2" High
Finishes:	US4 brushed brass US26D brushed chrome US10B dark bronze US3 polished Brass
ANSI:	L02131
Notes:	No exposed fasteners
Standard Fasteners:	(1) #12 × 1-1/2" SMS with plastic anchor (1) 12-24 × 1" MS (1) lead anchor

Floor Mounted Door Stop 535

Cast Brass or Bronze construction
2-1/2" diameter base x 3-1/8" high
Fasteners included

Floor Mounted Door Stop Heavy Duty 540

This Floor Mounted Door Stop is a personal favorite. It is extremely heavy duty, and is ideal for areas of high vandalism. Includes the 4-1/2" lag bolt & lag shield. The rubber base is 3" in diameter and is 2-5/8" high.  Uses a 3/4" diameter hole for the lag sheild.

Plunger Type Door Holder / Stop 583

Solid Cast Brass with black rubber shoe. 5-3/8 × 2-1/4" Base 1-1/4" Projection 1-1/4" Throw.

Plunger Type Holder 582

Cast Aluminum with gray rubber shoe. 6-1/4" × 1-1/2" Base 1-5/8" Throw. Cast Aluminum finish only

Material:	Cast Brass or Bronze with Black Bumper
Size:	2-1/2" diameter Base x 3-5/8" Projection
Finishes:	US26 polished chrome US26D brushed chrome US3 polished brass US4 brushed brass US10B dark bronze
ANSI:	L02021
Standard Fasteners:	(1) 5/16-18 × 2-1/2" stud (2) #10 OH SMS (1) #10 × 1" OH SMS with plastic anchor (1) lead anchor (1) 5/16-18 × 2-1/2" hanger bolt

The 591 manual flush bolt is for wood doors and is UL listed. It is constructed of solid brass. The face plate is 1 x 6-3/4 inches. The mortised body is 6 inches high by 1-3/8 deep by 1 inch thick. The screw spacing is 1/2 by 6-1/4 inches on centers.

The 590 is made of solid brass and ships with matching screws.  The faceplate measures 1 x 6-3/4 inches, the strike is 15/16 x 2-1/4 inches and comes standard with a 12 inch rod.  The mountng screws are 1 x 6-1/4 inches on centers.

Fully concealed mounting design which enhances appearance and security. Furnished with universal top strike and flat bottom strike. The bolt measures 8 x 1 inches and is constructed of extruded steel with a brushed chrome finish. Ships with mounting screws, and the latch is UL listed.

The 598-12 or 5599-24 feature heavy duty steel construction to ensure maximum strength and security. The bolt measures 1/4 x 3/4 x 12 or 24 inches and ships with strikes and mounting screws. The finish in Brushed Chrome. This bolt is UL approved.

The 594 is constructed of solid brass. The latch bolt is 5/8 inch half round with a 9/16 inch throw.  The bolt ships with mounting screws and strike. The latch bolt has a chamfered end to draw the door in.

The wall mounted strike has a pivoting head to adjust to different wall angles.  Constructed of cast brass that is then satin chrome plated.  Base is 3-11/16 x 3 inches, with an 1-15/16 inch projection.  The strke projects 3-1/4 inches.