Exit Devices| Cal-Royal
Exit Devices and Hardware to Ensure Safety in Your Commercial Building
At Robert Brooke & Associates, we are known for being a top distributor of exit devices (also sometimes called panic devices) and hardware from highly-esteemed and trusted brands throughout the door security industry. The exit devices we have available can be newly installed on doors in various facilities with a constant inflow of visitor traffic. We also sell door hardware that can replace old or worn down hardware on your previously-installed devices.
Having a security system in place on doors has become crucial to the safety of visitors in a building. Whether in a school, office, or another type of building, regulars and visitors deserve to feel safe. One reason we entered into the industry was to be able to provide consumers with exit devices that can potentially minimize danger in buildings everywhere.
Our selection consists of surface vertical rod devices, concealed vertical rod devices and more. Don’t forget, we also have a wide selection of replacement hardware to keep your exit devices up-to-date and in excellent condition.
Exit Device Manufacturers
We carry several different styles of exit devices all made by reputable manufacturers. From Dorma exit devices to exit devices by Von Duprin, we have what you’ve been searching for! Plus, we have replacement door hardware for these devices from several first-rate brands in the industry. For a brief overview of each manufacturer and their products available in our selection, see below.
- Adams Rite
- Cal-Royal
- Corbin Russwin
- Detex
- Dorma Exit Devices
- Dor-O-Matic
- International Devices
- Jackson Exit Devices
- Monarch (Falcon) Exit Devices
- Sargent Exit Devices
- Exit Devices by Von Duprin
- Yale Exit Devices
High-Quality Exit Devices
Our website offers a convenient search tool so that customers are able to do a quick search for a specific item they are looking for. If there is no specific search in mind, browsing the array of panic devices will assist in narrowing down the options.
Our available selection includes surface vertical rod, concealed vertical rod, touch bar, push bar, heavy-duty exit devices and a number of other styles that you can order straight from our website. With several of these, you will have the option to choose the color, finish and size that you prefer.
Make note of whether you will need to order panic devices that work on single doors or ones that work on double doors for your installation project. Depending on the product, the panic devices on our website can work on either single or double. Reading the details will also tell you whether they are left-handed, right-handed or non-handed.
Click on the product image or text to find more dimensional and pricing information, along with the type of doors that the product can be used with. Remember to keep this information in mind when ordering your panic devices for your school, business, office, organization, athletic center or other facility.
Door Hardware for Exit Devices
We also carry an assortment of hardware for when a replacement part is needed to repair an exit device. The type of hardware that is required to make repairs to your exit device will depend on what type of device has been installed on the commercial building doors.
Dog keys, strike plate assemblies, end caps, dogging pins, mounting base kits, solenoids, lever trims, lever springs, spring retainer hubs and screws are just a few of the replacement parts that we have available in our online selection. Whatever the reason be that you require new hardware, we have the best replacement parts for you that will do just the trick. We can help you choose the best hardware to get your exit device working good as new.
Check Out Our Shipping and Handling Policy
Be sure to read our online product descriptions of each device and piece of hardware that you are interested in purchasing. The product description will have the shipping details for that particular item.
The shipping times will vary. If the Lead Time next to the product is In Stock, then the items that you chose to order will be shipped from our warehouse with no delay. The Lead Time for a product can also be a day, a week or more. In this case, your order will take longer to ship because it will be coming from the manufacturer.
Order Your Exit Devices Online
Buy your exit devices and door hardware online today! We not only have a supply of Sargent exit devices and exit devices by Von Duprin, but we also have so much more that can be shipped to you immediately.
We want to make sure that you are comfortable with your order and that any question you have is answered in a timely manner. Contact us with questions before you move forward with checking out and we will give you expert answers.
-
Cal Royal 2000 Alarmed Exit Device
Cal Royal 2000 Alarmed Exit Device
Alarm units has an internal horn. When the push rail is depressed, the horn sounds to provide an audible means of signaling that the door has been opened and violated. The unit has changeable 2 minute alarm cutoff or manual reset. Preset at factory for 2 minute alarm cut off. Jumper cable is provided to swich to continuous alarm. The key switch to turn the alarm off is a standard 1” cylinder with “C” keyway. The alarm operates on one standard 9 volt transistor battery. When battery is weak the horn will emit an intermittent signal. Alarmed units are supplied with two switches. One switch monitors the push rail and the other switch monitors the latch bolt for full proof security.
Unit includes “EMERGENCY EXIT ONLY. ALARM WILL SOUND” decal for application on door or unit.ALM2000 -
Cal Royal 2000 Series Exit Device Lever Trim
Cal Royal 2000 Series Exit Device Lever Trim
Non-handed Grade 1 (Clutch Style)
Cylindrical body hardened steel heavy duty tailpiece. For
1¾” and 2 ¼” doors. Prefix THI before part # for 2 ¼” door
thickness. Available for fire and non fire rated rim and
vertical rod exit devices.
Rose diameter 3 ½”, lever length 4 ¾”.ENTOOL- -
Cal Royal 7000 Alarmed Exit Device
Cal Royal 7000 Alarmed Exit Device
Same as the Cal Royal 7700, but with these added features"
Alarm unit has internal horn. When the push rail is depressed, the horn sounds to provide an audible means of signaling that the door has been opened and violated. The unit has changeable 2 minute alarm cutoff or manual reset. Preset at factory for 2 minute alarm cut off. The key switch to turn alarm off is a standard 1 ¼” cylinder with “C” keyway. The alarm operates on one standard 9 volt transistor battery. When battery is weak the horn will emit an intermittent signal. Alarmed units are supplied with a switch that monitors push rail only. Unit includes “EMERGENCY EXIT ONLY • ALARM WILL SOUND” decal for application on door or unit.
ALRM7700 -
Cal Royal 7700 Rim Exit Device
Cal Royal 7700 Rim Exit Device
For use in institutions, schools, universities, commercial buildings where heavy duty reliable operation is a requirement. ANSI A156.3, Grade 1 heavy duty exit device in surface vertical rod and rim designs. Rail assemblies are heavy duty extruded aluminum body with stainless steel push pad and end caps are made of brass, bronze or stainless steel. Rail travels in direction of the door swing. Trims are thru bolted for additional security. Conforms & Meets ADA Regulations. UL Listed for Panic and ULC10C, UBC 7-2-1777 codes. UL Listed for Fire Exit Hardware. Uncompromising security and safety in single and double fire exit doors. Chassis mounted unit construction. Rim and vertical rod devices are non-handed and easily reversible. Available in many different functions. Lever and escutcheon trims are grade 1 construction with clutch free-wheeling mechanism. Rose and escutcheon covers 161 cut out.
Templating matches the Von Dupin 99 and 98
CR7700EO- -
Cal Royal 7760 Surface Vertical Rod Exit Device
Cal Royal 7760 Surface Vertical Rod Exit Device
For use in institutions, schools, universities, commercial buildings where heavy duty reliable operation is a requirement. ANSI A156.3, Grade 1 heavy duty exit device in surface vertical rod and rim designs. Rail assemblies are heavy duty extruded aluminum body with stainless steel push pad and end caps are made of brass, bronze or stainless steel. Rail travels in direction of the door swing. Trims are thru bolted for additional security. Conforms & Meets ADA Regulations. UL Listed for Panic and ULC10C, UBC 7-2-1777 codes. UL Listed for Fire Exit Hardware.
Templating matches the Von Dupin 99 and 98
CR7760EO -
-
Cal Royal 4400 Exit Device
The Cal Royal 4400 Rim Exit Device has a Grade 2 rating. The device features a 3/4" Latchbolt, Roller Strike and a 1" diameter Crossbar. The device comes in a brushed chrome and dark bronze finish, and comes with either a 36" or 48" crossbar. You would need a 4-1/2" minimum stile width.
CR4400- -
Cal Royal GLS7700 Narrow Stile Rim Device
The Cal Royal GLS7700 Rim Device is for use on Aluminum Framed Glass Doors when the Stile width is 1-3/4 inch or more. The exit device ships with wood and machine screws, along with the Strike plate. The stainless steel latch bolt has a 3/4 inch throw. This device is a Grade 1, which is the heaviest duty rating.
GLS7700- -
Cal-Royal 9800 Rim Device
The Cal-Royal 9800 Rim Device is a grade 1 Heavy Duty Exit Device. The 9800 has the same template as the 8800 and 9800 with escutcheon lever trim. The 36 inch device will be 32 inches wide and can be cut down an additional 2" to fit doors as narrow as 30 inches. The 48 inch will be 44 inches wide and can be cut down to fit doors 36 inches wide. The device is non handed, meaning it will work on a left hand reverse or right hand reverse door. Strike and mounting screws are included.
9800EO- -
Cal-Royal 9000 Series Lever Trim HDESC
Cal-Royal 9000 Series Lever Trim HDESC is for use on the 9800 and 9800 Exit Devices. The Trim has a clutch mechanism to prevent breaking and two heavy duty springs to prevent sagging. Escutcheon measures 2-5/8 inches wide by 10-5/8 inches long. The lever projects out 2-7/8 inches. Key locks or unlocks lever.
HDESC- -
Cal Royal Escutcheon 4400 Lever Trim
The Cal Royal Escutcheon 4400 Lever Trim is non handed (easily field reversible), thru-bolted, rigid non clutch lever for the 4400 Rim Device. The key locks or unlocks the lever. The Escutcheon measures 2-3/4 by 8-1/2 inches, the lever length is 4-3/4 inches.
ESC44
